Testing Laboratory of equipment use in explosive atmospheres (ExTL CCVE)
Head of ExTL CCVE – Ershov Victor Valentinovich
Deputy Head of ExTL CCVE – Gul Artem Igorevich
Deputy Head of ExTL CCVE – Tipochenkov Sergey Fedorovich
Testing Laboratory of equipment for use in explosive atmospheres (ExTL CCVE) is accepted in the IECEx System (IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres).
IECEx certificate of accceptance of TL CCVE
ExTL CCVE performs tests according to the requirements of the following relevant IEC or ISO standards/ documents and issue test reports (ExTR) for obtaining the IECEx Certificate of Conformity or ATEX certificate:
- IEC 60079-0: Part 0: Equipment - General requirements
- IEC 60079-1: Part 1: Equipment protection by flameproof enclosures 'd'
- IEC 60079-2: Part 2: Equipment protection by pressurized enclosures 'p'
- IEC 60079-5: Part 5: Equipment protection by powder filling 'q'
- IEC 60079-6: Part 6: Equipment protection by oil immersion 'o'
- IEC 60079-7: Part 7: Equipment protection by increased safety 'e'
- IEC 60079-11: Part 11: Equipment protection by intrinsic safety 'i'
- IEC 60079-13: Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
- IEC 60079-15: Part 15: Equipment protection by type of protection 'n'
- IEC 60079-16: Part 16: Artificial ventilation for the protection of analyser (s) houses
- IEC 60079-18: Part 18: Equipment protection by encapsulation “m”
- IEC 60079-25: Part 25: Intrinsically safe electrical systems
- IEC 60079-26: Part 26: Equipment with equipment protection level (EPL) Ga
- IEC 60079-27: Part 27: Fieldbus intrinsically safe concept (FISCO)
- IEC 60079-28: Part 28: Protection of equipment and transmission systems using optical radiation
- IEC 60079-30-1: Part 30-1: Electrical resistance trace heating - General and testing requirements
- IEC/IEEE 60079-30-1: Part 30-1: Electrical resistance trace heating - General and testing requirements
- IEC 60079-31: Part 31: Equipment dust ignition protection by enclosure 't'
- **IEC/TS 60079-32-1: Edition 1.0 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance ** This TS may be used for testing purposes but not for issuing an IECEx Certificate of Conformity
- IEC 60079-33: Part 33: Equipment protection by special protection 's'
- IEC 60079-35-1: Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
- IEC 60079-35-2: Part 35-2: Caplights for use in mines susceptible to firedamp - Performance
- IEC/TS 60079-39: Part 39: Intrinsically safe systems with electronically controlled spark duration limitation
- IEC/TS 60079-40: Part 40: Requirements for process sealing between flammable process fluids and electrical systems
- IEC/TS 60079-46: Explosive atmospheres - Part 46: Equipment assemblies
- IEC 61241-0: Part 0: General requirements - Electrical apparatus for use in the presence of combustible dust
- IEC 61241-1: Part 1: Protection by enclosures 'tD'
- IEC 61241-1-1: Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
- IEC 61241-4: Part 4: Type of protection 'pD'
- IEC 61241-11: Part 11: Protection by intrinsic safety 'iD'
- IEC 61241-18: Part 18: Protection by encapsulation 'mD'
- IEC 62013-1: Part 1: General requirements - Construction and testing in relation to the risk of explosion - Caplights for use in mines susceptible to firedamp
- IEC 62013-2: Part 2: Performance and other safety-related matters - Caplights for use in mines susceptible to firedamp
- ISO 80079-36: Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
- ISO 80079-37: Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of protection constructional safety "c", control of ignition source "b", liquid immersion "k"
- DS 2015/001A: IECEx Assessment and Certification of Equipment assemblies